Sanyuan Yinda Petroleum Machinery Co.,Ltd
Since 2002, An API-7K Certified Factory of Mud Pump Parts, Wechat: yindashiyou whatsapp: +8613359241205 Skype: YINDA-API7Kfactory
Add to Cart
BOMCO F800/1000 KB45 Pulsation Dampner,AK45350100,AH34002-00 mud pumps for drilling rigs
The discharge pulsation dampener is only allowed to charge nitrogen or air. No inflammable and explosive gases are allowed such as oxygen, hydrogen etc.
The mounting for KB-75 pulsation dampener (1) is a flange with R-39 seal washer. Before installing dampener, thoroughly clean ring groove and ring, and after setting dampener into place, tighten the nut (8) with 950-1265N.m (700-935ft.lbs) torque. Tighten nuts in a criss-cross order.
Suction dampener is a very effective aid for improving suction performance and eliminating fluid pulsations in the suction line, which results in a smoother flow in the discharge line.
When stopping the pump check if the pre-charging pressure of discharge pulsation dampener meets the operational requirements.
| 32 | GB848 | Washer 12 |
| 33 | Rubber strip 40X10X5800 | |
| 34 | B.004 | Bolt 5/8-11UNCX2 3/8 |
| 35 | N.002 | Nut5/8-1W-2B |
| Spring washer 16 | ||
| 37 | B.003 | Bolt5/8-11UNCX15/ |
| 38 | RS11306.19.00 | KB-75 pulsation dampener |
| 39 | YK-150 | Shock resistance gauge 60MPa ZG101/2 |
| 40 | RS11309.16.00 | Discharge way spool |
| JA-3 Safety valve | ||
| 42 | RS11309.17.00 | Connect pipe. safety valve |
| 43 | SY5279.3-91 | Gasket ring R44 |
| 44 | RS11309.18.00 | 5-way spool support |
| Anaerobic oxyen glue for screw |
Mud Pump Parts Model We Can Do
| BOMCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | F-1600HL | F-1600L | F-2200HL |
| Hong Hua | HHF-500 | HHF-800 | HHF-1300 | HHF-1600 | 3NB-1600F | 5NB-1600 | 5NB-2400 |
|
| HRSB | RSF-1300 | RSF-1600 |
| |||||
| RG | RGF-800 | RGF-1000 | RGF-1300 | RGF-1600 |
| |||
| Lanzhou | 3NB1000C | 3NB1300C | 3NB1600F | 3NB1600L |
|
|
|
|
| EMSCO | F-500 | F-800 | F-1000 | F-1300 | F-1600 | FD-1000 | FC-2200 | FB-1300 |
| Gardner Denver | PAH | P7 | P8/9 | P10/11 |
|
|
|
|
| National | 7-P-50 | 8-P-80 | 9-P-100 | 10-P-130 | 12-P-160 | 14-P-200 | 14-P-220 |
|
| Oilwell | A-850-PT | A-1100-PT | A-1400-PT | A-1700-PT |
|
|
|
|
| TSC | WF-500 | WF-800 | WF-1000 | WF-1300 | WF-1600 | WF-2000 | WF-2200 |
|
| IDECO | T-500 | T-800 | T-1000 | T-1300 | T-1600 |
|
|
|
| RUSSIA | UNBT-1180L | UNBT-950A | UNB-600 |
|
|
|
|
FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details, production details. Then we issue you an PI for your confirmation. You will be requested to do pr-e paid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4) How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.
More customer view:79-OPI700 PUMP FLUID END-yindapump.com.pdf