BOMCO JA-3 Shear Pin Mud Pump Relief Valve AH0000060100 AH33003-00 Drill Rig

BOMCO mud pump JA-3 Shear pin relief valve,AH0000060100,AH33003-00,AH0000060200,AH33007-00 mud pumps for drilling rigs,

It is recommended that a suction pressure relief valve be used in the suction line to prevent damage to either pump in the event of a high pressure surge occurring in the line.

JA-3 Shear pin relief valve can be connected in two ways, one is threaded connection, and the second is flange connection. It is an insurance of mud pump, before the pump working, determines the rated pressure according to the cylinder and piston specification, the safety valve cover off the shear pin on the clipboard into the pin hole. If the pump head pressure exceeds the rated pressure, shear pin will be cut and mud from the side of the vent valve, play a protective role.

Application
Safety valve is used as a mud pump fluid end accessory in the oil drilling industry.

Function
The safety valve serves to guarantee smooth operation of a mud pump within rated working pressure range.

Features
The safety valve offers easy reset, flexible operation, small bearing area, and high universality.

Shear pin safety valve is used at the discharge part of the mud pump.JA-3 shear pin safety valve changes the discharging pressure by changing the position of the shear pin ,which is operation easy and work reliable.

JA-3 Shear Relief Valve, also named shear pin safety valve is used at the discharge part of the mud pump.

JA-3 shear pin safety valve changes the discharging pressure by changing the position of the shear pin ,which is operation easy and work reliable.

connection type:

screw thread

flange

Features:

1. Opening and shutting neatly.

2. Piston's bearing pressure area is small.

3. To reposition simply.

4. Safety Valve may use for multifold mud pumps.

5. flange / screw thread connection

6. Max pressure:35Mpa

It is recommended that the valve be located on the suction manifold of the pump, but may be located elsewhere on the suction line at the customer’s discretion.

The outlet line from the relief valve should gradually slope down to the tank level, and should be supported to prevent any dips or low spots where mud could collect, harden and potentially block flow.

The relief valve should be set to 50% greater than the normal operating pressure (70 psi for normal operations, but this value may vary depending on the specifics of the job).

Mud Pump Parts Model We Can Do

FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.

2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T is the most usual ways we are using.

3) What's the order procedure?
A: First we discuss order details, production details. Then we issue you an PI for your confirmation. You will be requested to do pr-e paid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

4) How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

More customer view:86-Southwest FB1600 pump-yindapump.com.pdf